Reply – How to Clean a Steering Wheel
Your Name
or Cancel
In Reply To
How to Clean a Steering Wheel
— by automycar automycar
How to Clean a Steering Wheel
Dirty or oily steering wheels are often overlooked when cleaning or maintaining a car. A build up of dirt and oils produced by your hands can make the steering wheel become slick,increasing your chances of losing your grip on the wheel. This risk is decreased when dirt and oil build up are removed by properly cleaning the wheel.
Method 1 of 2: Cleaning Different Kinds of Steering Wheels
1. Clean your hard plastic steering wheel. Steering wheel covers often have hard plastic inserts or accents launch x431 v plus. These covers can also be constructed entirely of plastic and are installed by simply snapping them on to your wheel. Cleaning with soap and water works well for hard plastics x431 obd tool.
Remove any soapy residue with clean water and dry the wheel with a lint-free towel.
2. Remove dirt from polyurethane coatings. Some materials such as wood,polished aluminum and painted surfaces will have a clear coating of polyurethane enamel or acrylic paint as their top coat. This thin layer of hard protective clear coat is non-porous like hard plastic. Polyurethane coatings can be cleaned using soap and water. Rinse all remaining residue and dry the wheel with a towel.
Unlike a vehicle's outer paint surface,do not apply wax or other shine-enhancing products to the surface of these wheel covers. These"shine enhancers"stay slick for a long period of time. Using such products will also attract dirt and oil.
3. Use a natural furniture polish if you have an old car with a natural wood wheel. Unfinished wood is a very uncommon material for a steering wheel. However,very old vehicles may still have the original wood wheel. Most owners prefer not to clean bare wood because it causes swelling,which can eventually lead to cracks or splitting.
However,classic car owners may apply a natural furniture polish to the bare wood to make the steering wheel look nice for classic car and truck shows. This polish is used to protect and enhance the natural wood grain. These polishes are natural and,in time,will disappear and leave the wood dry again.
4. Use aluminium polish to clean aluminium wheels. An aluminium wheel that has no polyurethane coat should be brushed or cleaned with an aluminium polish. To use the polish,you should apply a dime-sized amount on the folder corner of a clean,cotton towel. Rub the entire surface of the steering wheel with the polish. When you are finished,remove the dirty residue with another clean towel.
The polish will turn either grey or black,depending on how dirty the steering wheel is.
Aluminium that is several years old and has never been cleaned may require several applications.
5. Use soap and water to clean faux leather. Elasticized Polyvinyl Chloride (PVC) is the technical term for faux leather and is actually a pliable form of hard plastic. This material is most commonly used in aftermarket steering wheels and covers. Many steering wheels that are made of PVC are accented with hard plastic trim. Whichever combination of plastics or clear coated materials your wheel is made of,it should be cleaned with plain soap and water.
Wet a washcloth with soapy water and run it over the wheel. Rinse any soapy residue off of the wheel and then wipe the wheel down with a clean rag or towel.
6. Take care when cleaning leather steering wheels. Consider cleaning any product made with natural skin,including steering wheels,with leather cleaner and conditioner. This lotion-like product can be purchased as a cleaner and as a separate conditioner; if you buy them separate,you would apply the cleaner before the conditioner. Put some conditioner (or a cleaner and conditioner combo) on to a clean cotton towel and massage it into the leather steering wheel. Do this until you cannot see any more product being absorbed into the leather.
When the entire wheel is finished,wipe off any unabsorbed conditioner with a dry cotton towel and allow the conditioner to dry.
When using a separate cleaner,follow the directions on back of the package.
Method 2 of 2: Knowing When to Clean
1. Know when to clean your leather steering wheels. Leather or any animal skin steering wheel should be cleaned and conditioned whenever the skin appears or feels dry. Consider cleaning it annually to prevent oil build up.
2. Clean harder steering wheels when you notice dirt accumulating. Aluminum,plastic,clear coat,and non-porous steering wheels should be cleaned when you begin to notice any dirt or oils accumulating on their surfaces.
3. Understand why you should clean your steering wheel. Keeping the steering wheel clean and oil free will decrease your chances of having your hands slip off the wheel. If your grip slips off a dirty steering wheel,there is a chance that you could get into an accident.
<br/>Related Links<br/>