Reply – Citroen Elysee oil strain warning gentle won't glow
Your Name
or Cancel
In Reply To
Citroen Elysee oil strain warning gentle won't glow
— by wwhyukaa wwhyukaa
Mileage of about seventy six,000 km in the Elysee sedan. People reflect: oil force if the vehicle ignition is turned around the instrument panel warning light doesn't shine.

Troubleshooting:(1) Failure Cause Assessment,Oil tension warning light-weight to the instrument panel must be lit when the ignition change is turned on, the warning light will not glow the attainable explanations are: Speak to the oil force sensor within is negative.The oil strain warning light bulbs burned out.The oil stress warning light-weight line breaks in between.

(two) troubleshooting solutions, Open the hood, examine the linked wiring harness connectors transit access, no abnormalities had been identified; the iobd2 oil stress sensor plug unplug, turn the ignition switch, using a voltage meter to evaluate the DC voltage concerning connector terminals and Floor for battery voltage , indicating the oil pressure warning light line connections are good, the fault during the motor oil force sensor.Replacing the oil tension sensor, convert the ignition swap, oil tension warning light-weight can shine, but immediately after starting off the motor light-weight goes out, troubleshooting. Nevertheless, before long following the emergence from the oil stress warning mild isn't going to shine fault, or utilize a voltmeter to evaluate the voltage sensor connector terminals, continues to be regular.Could be the oil tension sensor and negative? A more in-depth inspection plugs, observed some harm, experience plug it back again sensor too tightly, hand struck oil stress sensor plug, not light-weight in the event the oil pressure warning mild to the instrument panel, the reason for the malfunction is found, the original sensor plug can not be seated, ensuing uobd2 in a very circuit breaker.

(3) troubleshooting steps,If the oil tension sensor plug trimmed to match the sensor socket connections are very good, turn the ignition switch, oil tension warning gentle might be lit immediately after starting off the motor may be turned from the lights, troubleshooting.

Failure Analysis: oil pressure sensor plug may well be previously when usage of the motor inadvertently by mechanical harm, ensuing in oil tension sensor connector is not linked tightly. The main overhaul, mistaken for oil force sensor failure, change sd connect the sensor, considering that the re-inserted back again to the plug switched circuit, and as a consequence the oil pressure warning mild can shine, but as a result of the present mechanical oil pressure sensor connector the personal injury just isn't inserted firmly, and so in cars and trucks with bumps fault circuit breaker after the vibration is reproduced.